|
Product Details:
|
| Product Category: | DIN41612 Connector | Pin Length: | 4mm/13mm/17mm/25mm |
|---|---|---|---|
| Number Of Terminal: | 2*25P 50pin | Number Of Rows: | 2rows |
| Terminals Type: | Straight PCB | Connector Type: | PCB Type |
| Insulator Color & Material: | Grey & PBT | Contact Pin Material: | Phosphor Bronze |
| Contact Plating: | Gold Plating(1u",3u",5u",10u",15u") | Pitch: | 2.54mm / 5.08mm |
| Gender: | Male | Terminal Length: | 13mm |
| Highlight: | 32 Pin din 41612 connector,Male din 41612 connector,15mm din 41612 connector |
||
2 rows 2×16Pin 32P PCB Male Press Pin DIN41612 15mm Connector, 32pin lengthen contacts straight PCB Eurocard male connector.
Product Catalog: DIN41612 CONNECTOR.pdf| 1. Product Line: | DIN41612 Connector |
| 2. Terminal Length: | 4mm/13mm/15mm/17mm/25mm |
| 3. Connector Type: | PCB DIN 41612 Connector |
| 4. Connector Gender: | Male |
| 5. Number of Positions: | 2×16P 32pin |
| 6. Number of Rows: | 2 rows |
| 7. Contact Material: | Brass |
| 8. Contact Plating: | 1U", 3U", 5U", 10U", 15U", 30U" |
| 9. Insulation Material: | PBT |
| 10. Color: | Gray |
| 11. Terminal Type: | PCB Straight |
| 12. Pitch: | 2.54mm |
| 1. Current Rating: | 5Amp |
| 2. Voltage Rating: | DC 1000V per minute |
| 3. Insulator Resistance: | 1000MΩ MIN. (at 500V DC) |
| 4. Operation Temperature: | -55°C to +105°C |
Eurocard line is available in board-to-board, wire-to-board, ribbon cable-to-board, and high-current connectors. Our Eurocard connectors incorporate internationally accepted design advantages of DIN 41612 and IEC 60603-2 two-piece connectors in a quality design that provides high Signal Integrity (SI) and electrical performance.
Common Bus Systems include STE Bus, CIMBUS, FUTUREBUS, VMEBus, MULTIBUS (II), NUBUS, VXi Bus, and VME 64X.
DIN 41612 is a DIN standard for electrical connectors widely used in rack-based electrical systems. Standardization of the connectors is a prerequisite for open systems, where users expect components from different suppliers to operate together. The most widely known use of DIN 41612 connectors is in the VMEbus system.
The DIN 41612 standard has been withdrawn in favor of international standards IEC 60603-2 and EN 60603-2, while maintaining full compatibility and performance.
Contact Person: Ms. Grace_ Zhong
Tel: (86) 18925547246
Fax: 86-0769-83690909